Cooling method of good price and quality Centrifugal pump
- Categories:Centrifugal pump
- Author:
- Origin:
- Time of issue:2022-08-11 08:50
- Views:
Cooling method of good price and quality Centrifugal pump
- Categories:Centrifugal pump
- Author:
- Origin:
- Time of issue:2022-08-11 08:50
- Views:
The good price and quality Centrifugal pump will generate heat during use. If the good price and quality Centrifugal pump is in a closed environment, it will cause its temperature to be high, and if the temperature is too high, it may not work properly, we need to see Look at the treatment of excessive temperature:
1. The stress of the pump casing is too large
Elimination measures: Eliminate the pressure and give feedback to the manufacturer. After the stress is relieved, check the condition.
2. Shaft bending
Elimination measures: Straighten the shaft or replace as required.
3. Coupling pump and drive
Remedy: Check the situation and re-apply if necessary.
4. Incorrect bearing lubrication or bearing wear
Elimination measures: Check and replace as required.
5. Too much lubricating oil
Elimination measures: remove the plug, so that the oil is automatically discharged. If the oil is pumped, the oil is drained to the correct level.
The above is a brief introduction to the cooling method of good price and quality Centrifugal pump.